Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

11.06.2025 03:55

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

At one ohm, the resistor has a maximum of 1 watt power.

He then describes the function of a fuse.

The bolt then partially travels down the line to your home.

Samsung Nears Wide-Ranging Deal With Perplexity for AI Features - Bloomberg.com

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Can the fuse protect the electronic devices from lightning instead of a surge protector.

He then describes Rainy Season and Lightning.

Can Djokovic climb the mountain? - Roland Garros

2024–10–14 [Omar Gharbi Omar Gharbi ]

It also is a device that limits the change in current flow.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Nintendo Switch 2 Welcome Tour overview trailer - Nintendo Everything

But… the neutral is now “floating” because of the 1 ohm resistance.

This one hit behind the barn.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Why do narcissists keep calling on the phone after years of separation?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

He then asserts :

I post the exact comment here.

What To Expect in the Markets This Week - Investopedia

What is lightning?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

nine

Why did my ex replace me so fast?

First Sentence:

These are simplified answers to the original question, and does not change anything I wrote above.

Barnstars:

Brain ‘Reset Wave’ May Explain How ECT Rapidly Relieves Depression - Neuroscience News

This is where this question deviates from being a 'generic' question, and becomes more specific.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

One is “what exactly is in a ‘surge protector’ ? ”

Knight, Nurse among unprotected in PWHL expansion - theScore.com

but this device (an Inductor) … impedes the rapid changes in the current.

(Dc diagram shown, AC is similar).

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

What is your opinion on the band Nickelback? Why do they receive criticism from some people?

But it can get overloaded, and no longer works.

A fuse is a non-resetable over current circuit protector.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Is there an ideal number of sessions in individual psychotherapy? Is there any point in continuing after reaching it?

2024–10–16 [ OO OLAOYE OYEBODE ]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Coco Gauff Beats Madison Keys, Updated French Open Women's Bracket at Roland-Garros - Bleacher Report

For this case there are devices called Metal oxide varistors (MOV).

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

What does a fuse do?

Is it right to visit any shrine or tomb in Islam?

the problem then depends on "how fast does the fuse operate?".

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Here is a simplified AC power diagram.

I have BPD. Why do I destroy everyone I love?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

[old diagram got deleted by accident]

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

what exactly is a ‘surge’ protector?

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

The MOV will conduct when the voltage exceeds 50% of line voltage.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

At least they know the answer if they wanted it.

so, what happens?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

A circuit breaker is similar, but is resettable.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

One

2024–10–10[John johnson John Johnson ]

The third is lightning and “how it gets conducted into a home.”

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

So, the voltage could go up to 500 volts, and the fuse will not open up.

Upvotes:

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

The other is “what does a “fuse” do?”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

These devices are installed between the “hot” and “neutral” and protective ground.

eight

a photo is worth a thousand words.

An AC voltage/ current source, and an ac inductive load.

but I think this circuit , shows a few more pieces.

Now when you have a certain ac resistance, then a current flows in a loop.

It seems Mohan does not understand the difference between a comment and an Answer.

There are three different concepts here that are getting confused.

Because the load is inductive, the current lags the voltage.(by a bit).

[image of Common-mode choke]

This device then solves the entire problem.

In schematic diagrams this is the symbol for a fuse:

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

This is where the MOV conducts again, and dissipated the energy.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

This is 'the assistant's answer'

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

There are two important concepts here.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Edit 2024–10.